About Kooriatel

Kooriatel · 06-30-2020

Hi Members,I have set an Sg300-28 Cisco in Router mode with the following config but only the interfaces on vlan 1 can reach internet. Vlan 2 pinging to internet gateway 192.168.100.1 fails. I have tried up route but nothing works. Any pointers will ...

Kooriatel · 07-27-2020

Have you assigned an IP to the Vlan?Proceed and configure a port to acess the vlan and attach a device and let us know if it works

Kooriatel · 07-27-2020

Did you manage to fix this.Can you post the full output of sh run?

Kooriatel · 07-14-2020

The confiig worked. Added a static route on Huawei to 7.0 with gateway as .77 and then plugged in a device to gi2. I was formerly usng ping...source with the interface not having anything plugged in reason why it was failing. was configuring the swi...

Kooriatel · 07-01-2020

Sorry been away from the office. Will revert soonest.

Kooriatel · 06-30-2020

Thanks for the pointer. I have googled about the cisco Sg-300 series and read a lot about it but it ain't a straight forward config as the catalyst. I have created the static route back to 7.0/24 with different gateways (7.1,100.1,100.77) but nothing...

Member Since	‎06-30-2020 05:40 AM
Date Last Visited	‎07-27-2020 11:20 PM
Posts	8

User Statistics

User Activity

Cisco SG300-28 VLANs can't reach internet except default vlan 1

Re: Activating a new VLAN

Re: SF300-48p static IP address for Vlan

Re: Cisco SG300-28 VLANs can't reach internet except default vlan 1

Re: Cisco SG300-28 VLANs can't reach internet except default vlan 1

Re: Cisco SG300-28 VLANs can't reach internet except default vlan 1