I have Two ASR 1001 but failover for return path doesn't workWorks fine leaving from firewall to ISP Problem when ISP trying to find firewallHSRP active R1 but Internet goes down by BFDtracert says ISP to router 2 10.10.10.2 than die finding to firew...
I'm looking to setup a full bgp table route lab setup for two dual homed to single ISP to single router.Anyone Where i get lab for it or have lab setup setup?
Do I have to redist for the BGP to have Rib and there is no around itrouter ospf 100passive-interface GigabitEthernet1network 3.3.3.3 255.255.255.252network 10.1.2.0 0.0.0.255 area 0!router bgp 100bgp router-id 3.3.3.3bgp log-neighbor-changesnetwork ...
I wrote a script from TCL to write to text file in flashNeed help so this can be output to router syslogor help write EEM script that does the same thing tclshset fp [open "flash:pinglogs.txt" w]for {set i 1} {$i<10} {incr i} {set systemTime [clock s...
HSRP by tracking interface detect layer 2 fail and not by ip like BFDMost ISP do Router on Strick because router doesn't have enough ports so use layer 2 switch to interconnect.Just wish BFD works well with HSRP. this will not be a problem if firewal...
my local-pre and AS-prepend is already working as need itBFD is running on ISP and Active routermy problem HSRP doesn't see when BFD failsOnly when I do by ping HSRP works fine.I really want HSRP work with BFD without tracking ping
