Hello everyone,I am trying to configure Site-to-Site VPNs as below:Site A:FTD v6.7  In/Out Static IPSite B:Modem external interface FQDN "my.exemple.com (IP 93.229.6.x it always changes)" - internal interface DHCP 192.168.178.0/24FTD v6.7 receives fo...

Hi all, I have site to site VPN SiteA and SiteB.Inside FTD1 192.168.1.253Inside FTD2 192.168.88.253From siteA I can ping all IP 192.168.88.0/24 from siteB except FTD2 192.168.88.253Why and how could I ping FTD2 and vice versa. Thank you

Hello, I have three FTD 6.6.1 managed by FMC 6.6.1, all three are the mesh topology.I got the following error message: Tunnel Manager failed to dispatch a KEY_ACQUIRE message.Probable mis-configuration of the crypto map or tunnel-group. Map Tag = unk...

Hi,I have FTD and a FMC, all of them have the 6.6.1 version.I have three sites, siteA, siteB, siteC are in mesh topology. I configured AnyConnect VPN for the main siteA.But I couldn’t move the Remote Access VPN setup to the main site (Site A) and con...

Hello Everyone,How could I do the remote access of the VPN client connectivity to the other 2 sites over the VPN tunnels?I mention that I have three sites in mesh topology. Anyconnect is configured for mainsite.What should I configure for the NAT + A...