About LarkHerrick53144

LarkHerrick53144 · 08-17-2020

I have a 4451-x ISR and need a reliable method for determining if the router is powered on and functioning. I have SNMP v3 available to query the 4451-x but have found that the method I use to query the 4451-x is dependent on which version of the IO...

LarkHerrick53144 · 08-19-2020

?I'm not exactly sure what is being used. Unfortunately the response we get from the router is different depending on the IOS installed on it. I'm looking for suggestions on what is recommended that will not be subject to the whims of newer IOS versi...

LarkHerrick53144 · 07-21-2020

I've discovered that the 3.16.9 IOS requires each service instance command be preceded with the interface ethernet-internal1/0/0 command. Without it, each service instance command after 12 is flagged as an invalid command. 3.16.02 IOS did not requi...

Member Since	‎07-21-2020 05:15 PM
Date Last Visited	‎08-30-2020 10:48 AM
Posts	3

User Statistics

User Activity

Obtaining 4451-x status

Re: Obtaining 4451-x status

Re: 4451-X ISR new IOS flags "service instance" commands