About Moti A

Moti A · 08-29-2021

Hi,I am trying to build a site-to-site VPN between ASA running 9.8(2) and IBM Cloud.The ASA is behind NAT device so the outside interface has a private IP 10.0.0.1, for this question the NAT address is 2.2.2.2Phase 1 has come up: (I removed the remot...

Moti A · 07-28-2020

Hi,I am trying to capture encrypted traffic between two MACsec enabled switches (manual mode), I put the secured interfaces as a source but I can see clear test capture even though I can see that the links are secured.I am using 6504 switches with WS...

Moti A · 08-31-2021

We did some workaround by terminating the VPN on a firewall that has its outside interface configured with public IP so there is no NAT taking place and the ID remains as is.If the setup will move back, I'll perform the tests that you asked. Thanks.

Moti A · 08-31-2021

Hi Milos,The other end has no ability to modify any parameter that is related to the identity.when you say "simple NAT comes with consequences" what do you mean?

Member Since	‎07-28-2020 05:24 AM
Date Last Visited	‎09-14-2021 11:39 AM
Posts	4

User Statistics

User Activity

Unalbe to establish VPN between ASA and IBM cloud

MACsec switch-to-switch capture traffic

Re: Unalbe to establish VPN between ASA and IBM cloud

Re: Unalbe to establish VPN between ASA and IBM cloud