About martinsalamon

martinsalamon · 06-08-2021

Hello,i am working on a project and have set up a few networks. One is set up on static IPv6 addresses and the other on a router DHCPv6 prefix delegation where one of the sub-router receives the IPv6 address from the main router. I have tried to mak...

martinsalamon · 09-02-2020

Hi, i recently got a wireless Cisco router AIR-CAP3702I-E-K9 that when launched has its IOS set as hostname instead of router and i cant enter global configuration mode. Like its disabled. Wondering what could be the problem here. RegardsMartin

martinsalamon · 08-06-2020

Hi,im wondering if there are any practices or exercise on how to confugure/test/simulate any kind of layer 2 multicast packets. To see them travel on the network in the simulation. Regards.

martinsalamon · 08-04-2020

Hi,im wondering what kind of QoS for VoIP can i implement in a very simple Packet Tracer lab. Like this:I just need something that will show in the simulation how the configurations affected the network and VoIP. Regards.

martinsalamon · 06-08-2021

I cant believe i missed the router-id. Thank you. And yes even after the router-id has been set the ping between PCs still wont work. As you said because of PT. I will try it on live equipment now. Thank you.

martinsalamon · 06-08-2021

I know OSPF works in Packet Tracer. I just dont know if it will work on routers that have their interface IPv6 addresses allocated by a DHCPv6 server.The problem is the network on the left. The ISP router is the DHCPv6 server and is allocating the IP...

Member Since	‎08-04-2020 05:06 AM
Date Last Visited	‎06-09-2021 01:07 AM
Posts	6

User Statistics

User Activity

PacketTracer 8.0.0, OSPF and DHCPv6

Cisco AIR-CAP3702I-E-K9 cant configure?

Multicast layer 2 configurations/practices for Packet Tracer

Packet tracer VoIP QoS

Re: PacketTracer 8.0.0, OSPF and DHCPv6

Re: PacketTracer 8.0.0, OSPF and DHCPv6