I have an SG 200-50 that had firmware version 1.0.0.19 (the very first version). I tried to update the firmware to 1.3.7 and the boot file to 1.3.5 so I could then upgrade to 1.4.11. Now I cannot ping the switch after rebooting it. Sadly, this is the...

Following the instructions in this link to try to get a backup of my start up config:https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-200-series-smart-switches/smb2897-download-or-backup-configuration-file-on-an-sx200-sx30...