About schlingloff

schlingloff · 02-07-2014

Hi *,in reference to this the following guide, i'd like to identify the Asic-ID, to plan the integration of a FEX 2248PQ to an F2 module interoperated in an F2e M1-xl context-type. http://www.cisco.com/en/US/docs/switches/datacenter/nexus2000/sw/conf...

schlingloff · 04-07-2010

Hello, I've got (again) an issiue with CiscoWorks LMS 3.1. I can't launch the Topology Services.The App tries to launch and doesn't complete the launching process. Please see the attached screenshot.I'm running Java 1.6.0_05 (the special cisco works...

schlingloff · 03-04-2010

Hi,We've got a small monitoring Issue.When we're connected to the primary (active) ASA over a VPN-tunnel, we're unable to ping/telnet/snmp/... the secondery (standby) ASA.Inside the site (without using a vpn-connection) we're able to ping it!We're ru...

schlingloff · 01-26-2010

Dear Community,i would be very glad if you could help me with this thopic...i seem to have some trouble understanding it...Here an example:2010-01-18 06:28:44 Unknown alert received from device ber-be-swt01.is24-rz.de of type SwCiscoIOS. Device Ti...

schlingloff · 02-19-2009

Hello,I added a 3560G-48TS Switch to the DCR with the following:- Device Type: Unkown Device Type- Device Name- Host Name- IP Address- User Name / PW- SNMPv1 Community StringUnfortunately the Device isn't visible in DCR, but is in RME where a configu...

schlingloff · 06-18-2014

We've found no solution out-of-the-box, even after some intense research. But we implemented a simple workaround: Embedded Event Manager Applet. (EEM) event manager applet EM-CHECK-FEX description "Checks FEX for availability because no trap would ...

schlingloff · 02-07-2014

Well "show hardware internal carmel all" doesn't seem to be supported on an n7k. I've tried it on m1xl and f2 context-types...no luck at all. I only saw that inside the n5k documentation

schlingloff · 02-07-2014

Hi Jon Hi Steve,thank you for your quick responses. I just wanted to make sure, using an apropriate show command, that the "so called" asic-id are not random/weird assigned. That link was very helpful and well explained. Basically I'd hoped that Cisc...

schlingloff · 01-06-2014

This topic is really interesting and does also apply to me. Are there further hints/solution that can be given?

schlingloff · 04-12-2010

Well i did some sniffing on the client.Im kind of uncomfortable posting the capture here (whireshark) since there was a lot of other traffic which may include unsecure transmission of passwords.Please tell me if the information i provided was adequat...

Member Since	‎02-03-2009 05:51 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	22
Total Helpful Votes Received	5

User Statistics

User Activity

Nexus 7000 - Integrate FEX - Identify ASIC ID

Can't Launch Topology Services - LMS 3.1

VPN-Tunnel - Unable to ping the secondary ASA

Problems understanding SNMP OIDs/Traps

Recently Added Device not visible in DCR but visible in RME

We've found no solution out

Nexus 7000 - Integrate FEX - Identify ASIC ID

Nexus 7000 - Integrate FEX - Identify ASIC ID

show broadcast packets on a VLAN

Re: Can't Launch Topology Services - LMS 3.1