About 9813108aa

9813108aa · 01-23-2021

Hello All, In the data center, I need to run L2VPN, so I plan to use VxLAN EVPN as the overlay, but I hope that VxLAN EVPN can be forwarded by SR Traffic-eng using Explicit Path. I don’t know if this can be achieved on Nexus 9000 series switches? Doe...

9813108aa · 11-09-2020

Hello All, I try to create etherchannel between SW1 and SW2 with service instance on CSR,but it not working for etherchannel , How can I solve this problem,follow please CSRinterface GigabitEthernet1no ip addressnegotiation autono mop enabledno mop s...

9813108aa · 09-30-2020

Hello I run Cisco IOS XR Software, Version 6.0.1examplePC5 (e0/0.10) ---- (g0/0/0/2.10) R1 (g0/0/0/4.10) ---- PC6 (e0/2.10)But PC5 cannot ping PC6, what is the problem? PC5interface Ethernet0/0.10 encapsulation dot1Q 10 ip address 172.16.10.5 255....

9813108aa · 09-14-2020

Hello I tried to configure PBR under the interface of the configured service instance, but the route-map did not match any traffic anyway. What is the problem? #sh acceExtended IP access list 10010 permit ip any any #sh route-maproute-map 10, deny, s...

9813108aa · 09-10-2020

Hello ! I have an ASR 1001-x and IOS is Version 16.03.10. I don’t know why I can’t use the mpls ip and l2vpn vfi context commands in this version (for VPLS), can anyone tell me that I need upgrade the version or buy a license ? which license if I sho...

9813108aa · 11-10-2020

Hello This is port channel configuration and have no port channel on CSR , ony Switch SW1&SW2interface Port-channel1switchport trunk encapsulation dot1qswitchport mode trunkend

9813108aa · 09-15-2020

Hello Rick Thank you for your reply. Now I know that PBR cannot be used on the interface set by the service instance. I use VPLS on ASR1000, so I will use the service instance, but I also use mpls-te, so I want to use PBR to select a specific tunnel ...

9813108aa · 09-14-2020

Hello Rick You noticed that my interface does not have an IP address, because this is dot1q 10 that uses instance to match, so there cannot be an IP address on this interface, but you say "You can not successfully activate an IP activity like PBR on ...

9813108aa · 08-25-2020

Hello !thank your reply , I have a question, please adviseCSR-1000 cannot create interface vlan to associate with xconnect vfi but can use l2 vfi autodiscoveryiosvl2 can create interface vlan to associate with xconnect vfi but cannot use l2 vfi autod...

9813108aa · 08-20-2020

Hello !Thank your suggestion ! I will try it .. Although I don`t know if RSVP TE can work in EVPN :)

Member Since	‎08-17-2020 08:11 AM
Date Last Visited	‎04-23-2021 07:28 AM
Posts	17
Total Helpful Votes Received	5

User Statistics

User Activity

SRTE support VxLAN on nxos?

Service Instance forward LACP protocol on ASR router

IOS-XR has problems running EFP

How is PBR applied under the interface of the configured service instance?

Cannot run l2vpn and mpls ip commands in ASR 1001-x

Re: Service Instance forward LACP protocol on ASR router

Re: How is PBR applied under the interface of the configured service instance?

Re: How is PBR applied under the interface of the configured service instance?

Re: Which IOS can support all the functions of VPLS and MPLS TE?

Re: Which is more appropriate for ISPs, VPLS or AToM?