About SK41570

SK41570 · 09-15-2020

Hello, Following an upgrade to IOS 15.2(7)E2 we have experienced connectivity issues for some devices connected to one of our VLANs. We have a port channel configured with 2 x 10Gb ports using twinax cables. Connectivity is only affected on 1 interfa...

SK41570 · 09-15-2020

Thank you Leo, I will have a read through them bug articles.

SK41570 · 09-15-2020

No I am troubleshooting remotely at the moment. I can schedule some downtime and be on site to give it a reboot but it would be nice to know what's causing it.

SK41570 · 09-15-2020

HI Leo, please see my answers below. Hopefully that helps clear up the issue: Two ports, in an etherchannel, from the 2960X to the 3850 - Yes 2 ports in configured in a port channel using LACP. One port is working fine - Yes when the faulty interface...

SK41570 · 09-15-2020

Hi Leo, yes appears to be the port channel between the 2960X and 3850 switches.

SK41570 · 09-15-2020

Hi Georg,Same output for both sides: EtherChannel Load-Balancing Configuration:src-macEtherChannel Load-Balancing Addresses Used Per-Protocol:Non-IP: Source MAC addressIPv4: Source MAC addressIPv6: Source MAC address

Member Since	‎09-15-2020 01:24 AM
Date Last Visited	‎09-15-2020 09:09 AM
Posts	7
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco 2960-X 15.2(7)E2 Connectivity Issue

Re: Cisco 2960-X 15.2(7)E2 Connectivity Issue

Re: Cisco 2960-X 15.2(7)E2 Connectivity Issue

Re: Cisco 2960-X 15.2(7)E2 Connectivity Issue

Re: Cisco 2960-X 15.2(7)E2 Connectivity Issue

Re: Cisco 2960-X 15.2(7)E2 Connectivity Issue