Hello,I have a Cisco c3750 switch as a layer-2 device so ip routing is disabled. The router is still a Windows Server 2019 with an Intel network card an vlan activated. The windows server has ip 192.168.1.1 and IP 192.168.10.1 linked with the vlan-id...
Hello,I have configured my Cisco c1000 with some VLAN and one PVLAN. That works so far as expected but I am unsure if it is possible to use the same uplink interface?# works for VLAN (uplink)
int gi1/0/1
switchport mode trunk
switchport trunk native ...
Hello,I am a bit confused about useing the MGMT Port on Cisco c9200 and C9300 devices. If I understand the Cisco document here right LINK the management port is not accessable from the other network ports. Thats is exactly what I need, the MGMT port ...
Hello,I have an question about the SFP-10G transceiver. For example, I have two Cisco switches, one has an SFP-10G-SR and the other one has an SFP-10G-SR-S transceiver. Would this work in a productive environment?
Hello,actually I think I have an understanding problem with ACL on the CBS250 series.I use a DHCP Server with IP: 192.168.100.65/27 When I set this input rule:permit udp any any 192.168.100.65 0.0.0.0 67-68 ace-priority 1The client cannot recieve the...
I swapped the firmware 2 times and now all works like expected!These kind of problems costs me a lot of my lifetime... But in future we will keep off our hands from this serie and move back to Cisco Catalyst. @marce1000, thank you for your help. :to...
There is no difference between 3.0.0.69 and 3.1.1.7 (latest).Same configuration is working flawless with a C1000. Something is different on the CBS250 series.
