Hi,I've a deployment of a TP1000 and a TP500. Does anybody know if the Telepresence Manager is mandatory to establish calls between this two endpoints?Regards,Francisco Valle
Hi,I've a customer who is complaining about the time it takes to IP Phones in a remote site to register with the SRST router during a WAN failture (2 minutes aprox)Is there any way to reduce the time it takes to an IP Phone to register with an SRST r...
Hi,I just want to know if it's possible to control an analog telephone connected to a VIC-2DID card with a CallManager.Thanks in advanceFrancisco Valle
Hi Paolo,Thanks for your response.My case is this: My customer is using an Ericcsson PBX and a CallManager but the Ericcsson does not have suplementary QSIG support and does not send the name asociated with the caller id.My customer is asking if we c...
Hi Ajaz,Thanks for your response.I read about the time it takes to an IP Phone to receive the keepalive from the CallManager and the fact that the IP Phone needs to lose 3 of this keepalives to try to find another CallManager.My question is if I can ...
Hi Brandon,Just one more question. I read that it is not possible to control this kind of ports using SCCP:http://www.cisco.com/en/US/partner/products/ps6441/products_feature_guide09186a0080483a76.htmlJust want to know if with CallManager will be abl...