Hello
I am hoping I can get someone to give me advice on what model antenna or antennas to use for this application
Cisco 1532E AP
I cannot mount it in plain site and need to put in an area where I can use extended cables for the antenna. What m...
Hello
lease need some help here as I have been going in a loop here for a few days
I have a 1532i Outdoor unit trying to connect to the controller and I am getting to then point where I am getting the error
Image is not a valid IOS image arc...
HelloI am looking for some information on why I do don't see a selection for "n" Wifi in the WLAN section of the controller?I wanted to do G/N but no choice for this. Thank YouJoseph
HelloI am trying to get separate SSID's on a 2405 WLC and learned that you need to use a WLAN ID above 16.This linked helped a lothttps://community.cisco.com/t5/wireless/how-to-add-existing-ssid-to-specific-access-point/td-p/2765878 I need a controll...
Hello, I have a few questions pertaining to the title of the post. Are VTI VPN on Cisco Router capable of being behind another PAT / NAT device? AKA Router.If so.... on the Tunnel interface of the router behind the nat device with a private IP do you...
Hello
Thanks for pointing that out. I see in red the AP_BUNDLE now. So you are correct I didn't upload this. I am now trying to get a contract on this so I can download the correct software bundle.
Hi
Well I output this and
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 8....
Hi
Thank you for your reply,
I saw this that you noticed and was very suspicious. However didn't know the path to the remedy. I saw rthat the AP image was not on the controller
I have a few questions here please.
1. I have WLC version 8.5.171.0 ...
