About Robert Dantes

Robert Dantes · 05-03-2017

Hi Experts, We are in the process of migrating from a Solarwinds on a windows OS monitoring system to Linux based one. this system is monitoring a number of device on a remote site over VPN that we dont have control of the far end VPN peer. It was ...

Robert Dantes · 05-18-2012

Hi All, i need help i have Router 1 conecting to router 2 and 3 and router 2 and 3 to each other. I already have eigrp running and it is already distributing route. but for some reason a static route that i made defualt-network is still not being dis...

Robert Dantes · 05-05-2017

Thank you Sing! It worked, though i had to use static source on the line translating 10.1.1.10 for me to be able to receive the traps sent from the remote network. And for some reason ping is not working for 10.1.1.20 but im able to RDP to the remote...

Robert Dantes · 05-19-2012

Ah I figured it out! I need to supply a network command for the 192.168.1.0 network under eigrp on router 1. I dint think I needed to add a network command for it since its only a static route and not an actual network directly connected to router 1 ...

Robert Dantes · 05-18-2012

Hi johnlloyd, thank you for your response but my problem is i want to understand why my lab is not distributing default-network information. basically my question right now is, that eigrp on default setting, to distribute a static route using default...

Member Since	‎05-18-2012 07:55 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

NATing to a same IP of another host in the same network

help default-network not being distributed over eigrp

Thank you Sing!

help default-network not being distributed over eigrp

help default-network not being distributed over eigrp