Hi all,Setup: lab envt that includes a Cisco ACS 5.3, a 2960 switch and a couple of host devices;Scenario: host devices fail to authenticate on Cisco ACS, and are redirected to a Guest vlan/zone;Objective: prevent host devices from seeing each other ...

Hi experts,I'm looking into a network access control solution, and I have the following questions:1- My understanding is that ACS assigns unauthorized assets to a guest vlan/zone, but what happens next if access to resources (such as internet) requir...

Hi all,i have the following scenario: one router (1841) connected to the WAN on s0/0/0 and to the LAN on f0/0.s0/0/0 is showing an incresing number of CRC, input errors, overruns and aborts; f0/0 does not.the cpu load is normal (12-15%), the WAN link...

Hi all,i have an issue using nat & global; i have the following config on my pix, running 6.3nat (inside) 2 access-list ftp_clientsnat (inside) 5 access-list DomainControllersnat (inside) 5 172.16.254.0 255.255.255.0access-list ftp_clients permit any...

Hi All,I created a remote access VPN on my ASA through ASDM. The internal LAN in 192.168.14.x; the remote access pool uses 10.254.14.x; my vpn client logs in normally, but once in, i am not able to reach 192.168.14.x; any tips?