About charalampos Perakis

charalampos Perakis · 11-26-2020

I have a problem with port flapping on connections from my SMC server to my Cisco switch.Server board is a Supermicro X11SDW-4C-TP13F+ which has 4x onboard x722 10g SFP+ LAN ports.Switch is a SX350X-24F, and I am using SFPP-PC03 DAC copper twinax pas...

charalampos Perakis · 01-18-2021

I tried connecting to the combo port in my sx350x-24f. This works without any port flapping.Still my main problem is that the 4 combo ports in my sx350x-24f are being used to connect 4 clients through 10gbase-t rj45 cables. (one of the reasons I chos...

charalampos Perakis · 01-11-2021

As a follow up to the problem I reported with port flapping between the SFP+ ports of X11SDW-4C-TP13F+ SFP+ and Cisco SX-350X-24F I have done some testing. First off, In order to eliminate the possibility that the problem with port flapping is not ca...

charalampos Perakis · 12-23-2020

this problem has been fixed by Cisco. Cisco ticket # CSCvu44725 but i don't have accesscan someone help me...

charalampos Perakis · 12-01-2020

HiThe cable was connected to port 20 (which was down), I unplugged it and plugged it into port 19.First with flow control enabled on both the port and the LAN and EEE disabled on the port. .Second time with flow control disabled on both the port and ...

Member Since	‎11-26-2020 11:40 PM
Date Last Visited	‎04-01-2021 05:41 PM
Posts	5
Total Helpful Votes Received	10

User Statistics

User Activity

SX350X-24F problem

Re: SX350X-24F problem

Re: SX350X-24F problem

Re: SX350X-24F problem

Re: SX350X-24F problem