About charlesjp88

charlesjp88 · 05-23-2012

HelloI am trying to setup a VPN between a VLAN I have defined and another office. I have been using nat on the interface for internet access with a NAT pool.I created the VPN with crypto map and the VPN registers successfully.The problem I am encount...

charlesjp88 · 05-24-2012

Yes - I have 6 other vlans and plan on adding much more. I only have 1 wan interface I'm using for NAT outside, and don't plan on doing any other NATting except for VPNs.

charlesjp88 · 05-23-2012

Not what what is different really, but I got it working like this:ip access-list extended Internet deny ip 10.10.104.0 0.0.0.255 192.168.1.0 0.0.0.255 permit ip any anyip nat inside source list Internet pool wan_access overloadThanks so much for yo...

charlesjp88 · 05-23-2012

It only shows the static entries I have for other things:edge-1#sh ip nat translationsPro Inside global Inside local Outside local Outside globaltcp 65.49.46.78:3391 10.10.1.101:3389 --- ---tcp 65.49.46.78:3392 10...

charlesjp88 · 05-23-2012

So I have the following:interface GigabitEthernet0/2.104 encapsulation dot1Q 104 ip address 10.10.104.254 255.255.255.0 ip nat inside ip virtual-reassemblyip nat pool wan_access 65.49.46.70 65.49.46.70 prefix-length 28ip nat inside source list Intern...

charlesjp88 · 05-23-2012

Just to verify, this is replacing access-list 99?Thanks for the response.

Member Since	‎05-23-2012 07:38 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

VPN with Interface NAT

VPN with Interface NAT

VPN with Interface NAT

VPN with Interface NAT

VPN with Interface NAT

VPN with Interface NAT