About j.manley

j.manley · 10-04-2010

Hi all,I am runinning into a problem configurating ICMP to my trunk interfaces on the ASA. I can see the "Built inbound" in the logs, but I am receiving request timed out from the client. I am trying to ICMP from 192.168.4.11 to 192.168.1.200 and th...

j.manley · 05-17-2004

I am experiencing background noise during conversations through a 6608 blade. This happens on all local and long distance calls.

j.manley · 03-23-2011

I had this same problem last week.Here is an example of the issue I was having. After I contacted the Telco company and they ran some intrusive testing the T1 became clean again.BADTotal Data (last 24 hours) 2 Line Code Violations, 2218 Path Cod...

j.manley · 02-01-2011

I had the same problem with the options being unavailable.Once I uninstalled and reinstalled the IPC using the .exe. Everything was visible again.

j.manley · 10-04-2010

Updated config. thanksASA Version 8.3(1) !hostname ciscoasanames!interface Ethernet0/0 nameif outside security-level 0 no ip address!interface Ethernet0/1 nameif inside security-level 100 ip address 192.168.1.2 255.255.255.0 !interface Ethernet0/2 n...

j.manley · 10-04-2010

Thanks, I have added your suggestions, but now I am receiving:(when I ping from 192.168.4.11[host] to 192.168.1.1[core switch])"5 Oct 04 2010 12:53:11 305013 192.168.1.1 Asymmetric NAT rules matched for forward and reverse ...

Member Since	‎05-14-2004 03:15 PM
Date Last Visited	‎07-23-2018 09:57 AM
Posts	7

User Statistics

User Activity

Unable to ping ASA (8.3) 5510 interfaces

Background noise on a 7960 phone

Re: T1 PRI "path code violation"

Re: Unable to change tftp address in IP Communicator 7.0.5

Re: Unable to ping ASA (8.3) 5510 interfaces

Re: Unable to ping ASA (8.3) 5510 interfaces