hiI have 2 WiSM running in virtualization mode, the AP are not able join, knowing that i am running DHCP locally on the core switch and there is no DNS server, when I checked the boot of the access point it is saying it is unable to receive vci code ...

HelloI ahve 2 Cisco Wism installed on 6506-E running virtualization. when I run show wism status, the controllers are unable to get IP addresses for the service and mangt interface knowing the Vlan is there and local dhcp configured. wism service com...

GentsI configured an autonomous access point as being a repeater to a root one. I ping the root from the repeater and it is showing as connect. however,the wireless coverage has not been extended?what is the problem?

Guyssource IP and destination of EOIP tunnel is the management interface of each foreign anf anchor WLC?

GentsI 2 WISMs and 2 4402 controllers. the WiSM are the foreign controllers and the 4402 are my anchor controllers. I am trying to add them to the WCS for management purposes. however, I am not able. knowing that I have ICMP reachability between all ...