Hi,
It came to my notice that many 9100 series AP's (multple models) have put their 2,4Ghz radio in monitor mode. For a certain site I'm pretty sure that it will lead to coverage issues because too many AP's are in monitoring mode. Luckily it is not ...
Hi Gents,
When configuring a 802.1x SSID on a C9800 in 17.9.3 you can select the Security -> Layer 2 - Layer 2 security mode.
You can choose from :
WPA + WPA2 - and only check the WPA2 policy checkbox.
WPA2 + WPA3 - and only check the WPA2 policy ch...
Hi,I'm looking into ways to restrict traffic to my management GUI of the 9800-40 WLC.In the 5520 we have CPU ACL's deployed, restricting access.I know that I can attach an ACL to my management interface but what about the mobility traffic between con...
Hi, Currently I'm working on a issue which is very stubborn. One of our customers has very large open areas that are being made of aluminium walls , floors and ceiling and. Next to the room itself there is a lot of metal in the area / machinery , des...
HI, In the past with 8.2 code I was running into CSCve24687 (https://quickview.cloudapps.cisco.com/quickview/bug/CSCve24687). In our case this meant a lot of AP's on channel 36 power level 1 (I'm focusing on 5Ghz for now). In the meanwhile we are run...
The building is new so also they AP deployment.. the WLC itself is in use for multiple buildings.
In the past I think we also did FRA with the 3800's but put all the radios on client serving mode manually. I forgot the command but there was 1 command...
