I am on my 2nd 1601 and 2nd WIC-1DSU-56k and still keep getting "Bad Interfc" . Here is the boot log. I didn't post the entire config, because it errors out upon boot - even before applying any type of config. Any ideas? ThanksSystem Bootstrap, Ver...

I am attempting to connect to 1751 routers w/serial interfaces via t1 line. Router "A" (host side) is identical to router "B" remote side. I want to keep them on the same subnet for simplicity purposes. I have performed this feat with csu/dsu modu...

New install - Two 1751 routers each with a WIC-1T serial card in slot 0. I have router A set as 192.168.0.21 with port unnumbered. I want router B to be on the same subnet - 192.168.0.22 w/port unnumbered also. It gives me a conflict when I attempt t...

New install - Two 1751 routers each with a WIC-1T serial card in slot 0. I have router A set as 192.168.0.21 with port unnumbered. I want router B to be on the same subnet - 192.168.0.22 w/port unnumbered also. It gives me a conflict when I attemp...