Hi There, >>> Below is the output of Radius server working switch and non working switch the difference is host name ABCD and EFGH mentioned in the working switch. Please let me the how to steps to configure this. Working switch.:=============== SW0...
Hi Team, I am in the process to configure Radius server on Cisco L3 (CAT9K) switch, below is the configuration AAA group server radius NPS_RADIUS_SERVERSserver name Mikeserver name John!AAA authentication login default group NPS_RADIUS_SERVERS localA...
Hi Team, I am trying to add Cisco Switch C2960S to the Radius server, however the key string used here contains ? for example : radius-server host x .x. x. x AUTH-port 1812 acct-port 1813 key 0 ABCD?1234?** ? cisco switch does not take this string a...
Below is the output of show log, Please note IP address: X.X.X.X (Local System IP)Y.Y.Y.Y (Radius Server IP of Mike)Z.Z.Z.Z (Radius Server IP of John) Feb 5 06:34:48.430: Radius: radius_port_info() success=0 radius_nas_port=1Feb 5 06:34:48.430: RAD...
Hi Balaji, Thank you for your response. The problem here is Fallback local database credentials when TACACS+ server is unavailable it should fallback to the local database. I am able pass through USER mode credentials but not with ENABLE password. pl...
Hi Francesco, Thanks for your reply, The problem here is Fallback option, when my TACACS+ server is unreachable, it should fallback to local database credentials, after entering USER MODE credentials (from local database), ENABLE password prompt appe...
