Hello, If we have Cisco SD-WAN controller deployed on customer premises. Can we have these controller deployed behind an HQ cEdge which has an IP in the same range of the Cisco SD-WAN controllers and this HQ cEdge should be part of the Cisco SD-WAN f...
Hello All, What is the difference between E1000 and VMXNET3 network adapters when deploying Cisco SD-WAN controllers in ESXI? When to choose E1000 or VMXNET3? Thanks
Hello All, - I have a lab setup where there is 3 WAN edges: (ISR4331, vEdge cloud & CSR1000v)- I did upgrade vManage to 20.3.2.1 and both vSmart and vBonds to 20.3.2- upgraded vEdge cloud to 20.3.2- upgraded ISR4331 to 17.3.2- CSR1000v has IOS of 16....
Hello All, Is SD-WAN speed test supported on ISR 4331 and C1111?To enable speed test (data stream from settings), is it must to add the vManage IP (either vpn 0 or 512) or do we have other options? Thanks
You may need to reload the router, also try to detach the template and add the configuration using the CLI and then commit.If CLI configurations is accepted then try to push the template again
You can use the preference under the tunnel interface.So for example main tunnel has a preference of 100 and backup with lower preference (by default it is 0) inter ge0/0tunnel-interfaceencapsulation ipsec preference 100 https://www.cisco.com/c/en/us...
