I did, but that is specific to IOS-XE 3.6 or 3.7.  The 16.x we have doesn't have some of the show commands to confirm what queue the drops are occurring in. 

I'm curious if anyone has run into this issue with more modern IOS such as 16.x?  We were seeing heavy drops on a 4 port 1G etherchannel, less than 30 megabit out per member.  We applied qos queue-softmax-multiplier 1200 to global config, and the dro...

I agree.  It seems like it's just IOS-XE versions, which would mean 3650/3850 only I think.  But 15.2E exists for older switches too.  But the older switches don't include any wireless controller capability to my knowledge. Chuck

Do a 'display servers' and 'display networks' on the NetWare servers, to see if all services and networks are seen. If not, somethings wrong with the Cisco config or NW addresses. Any duplicates on the network, including NW internals? If NW 4 or 5...

Whoops, forgot to scroll down for the replies. If you're still getting it with 12.2.12a, it might be either a configuration issue, or hardware.Chuck