I am designing a lab topology within EVE-NG that mimic's a prod environment.. ..of course, in the real world, the prod environment uplinks are managed by BGP uplinks. My uplinks however to the WAN must be handled by my local home router. Because of t...
Hi, what is the best material to use to study for CCNP Enarsi? Also what are the best study methods? I typically do alot better with videos than reading material. I have difficulties focusing when reading and lose concentration very easily. That plus...
So I am having problems getting EIGRP to establish neighborship for a CCNP based lab. I have the WAN side configured for eBGP and also have a static default route pointing at the cloud (which is actually a router running eBGP.) but EIGRP fails to est...
I designed this topology...I configured all neighborships on the 172.16.x.x networks, but was unable to ping between each neighbor until I configured the 172.16.x.x network statements (and I mean network and not neighbor statements) on the cloud whic...
This is happening throughout the entire topology with eBGP peers. I can ping the physical interface but cannot ping the loopback address. It appears no neighborship is forming.I configured both ways -- ebgp-multihop 2 and also ebgp-multihop 1 between...
Hello. I will confess that these are DellOS10 switches and unfortunately I confirmed they do not support NATTING, while the CLI is largely based on Cisco, the OS is entirely different. I was thinking of putting a Cisco router in the topology just bef...
Hi. Yes, I do have CCNA. I am probably intermediate level in the network field but my roles have lately drifted further from R&S and more into virtualization, linux/ubuntu/fedora/cent os, git, automation, ect.. ..in fact it has been several years sin...
Thanks for the information so far. How do you feel about the 3 - 5 day Cisco courses? do you feel that is too short? I have been studying for months so far but do not feel comfortable taking the exam. Are those courses only supplementary or are they ...
It was the missing BGP configs on the spokes. I didn't notice that wasn't configured. R31 came up immediately.R41 oddly took several minutes before it came up but it eventually did.
