About HrvojeStargl

HrvojeStargl · 04-03-2023

Hi all, we have a customer who is using Cisco DNA ( DN2-HW-APL) on version 2.2.3.4 They need to relocate this appliance from one data center to another. The device is not a member of a cluster, but initially, they marked the enterprise port as a clus...

HrvojeStargl · 02-25-2020

Hi all, I have Cisco PI 3.7 with 52 switches, 1 WLC, and 51 AP's in the database.The problem is that PI connect with SSH only on 4 switches and execute the command "enable" in random times.Does anybody know why he does that, why only on few switches ...

HrvojeStargl · 02-09-2017

Hi all,We have Cisco 3750-x switch with NPE image. I don't know why did customer bought this kind of image from previous system integrator, because we are not on Cisco list of countries that can't use non NPE images.Few days ago, we tried to implemen...

HrvojeStargl · 07-28-2015

Hi guys, I have Cisco UCS 6120xp fabric interconnect, with two N10-PAC1-550W power supplies.One power supply is dead.Power supply N10-PAC1-550W is EoS, and the replacement is UCS-PSU-6296UP-AC. Will fabric interconnect work with mix of those two powe...

HrvojeStargl · 02-25-2020

Hi, thank you for your reply, but why I see that logs only on 3-4 switches and on other switches there's no connection and logs.All switches are 3850 models with the same IOS image.

HrvojeStargl · 02-25-2020

This is the clean install of PI. I just added devices in the monitoring section.As I said, there is no additional job defined.Here are the logs from the switch:Feb 24 10:33:54.063: %PARSER-5-CFGLOG_LOGGEDCMD: User:prime logged command:!exec: enableFe...

HrvojeStargl · 07-31-2015

Thank you Keny,My mistake, I copied the wrong part number from the table.

Member Since	‎06-15-2015 06:49 AM
Date Last Visited	‎04-11-2023 02:52 AM
Posts	7

User Statistics

User Activity

Cisco DNAC - relocation of the appliance

Prime infrastructure 3.7 execute enable command

Replacement of IOS NPE image

UCS 6120xp fabric interconnect power supply

Re: Prime infrastructure 3.7 execute enable command

Re: Prime infrastructure 3.7 execute enable command

Thank you Keny,My mistake, I