About lanky393

lanky393 · 01-24-2021

I'm new to cisco networks (and network admin in general), so apologies in advance if I'm missing something simple.I have a 1921 router and a 2960-S switch that I'd like to connect a PC and to the internet (see diagram below). I've configured the rout...

lanky393 · 01-24-2021

Thanks @Georg Pauwen and @TJ-20933766 , it must have been a cabling/connection issue though I'm not sure what. Switch is back in its default state (I didn't save running config and restarted it) and using the same cables and ports it's now up and ru...

lanky393 · 01-24-2021

Hi Tyson, No indication that anything has changed at all when the cable is un/plugged. I have tried the cable as one of the other links and it works and tried other cables and ports.

lanky393 · 01-24-2021

Thanks Georg, still the same situation. If it was that wouldn't it also have been an issue when connected directly to the Virgin(ISP) router?//snipinterface FastEthernet0no ip address!interface GigabitEthernet1/0/1switchport mode accessspanning-tree ...

lanky393 · 01-24-2021

Hi, sorry I did put that in my original post "I've also attaches the packet tracer file though the router and switch are slightly different in this (no 1921 router or 2960-S to choose) and I was just using it to get a picture."The real devices I'm us...

lanky393 · 01-24-2021

Thanks, I tried that, here's what I ran on the switch and its current config, the first messages are as I connect the PC to port 1 and router to port 24 (note no message from port 24). it still seems to be in the same state:Switch#*Mar 1 00:03:52.359...

Member Since	‎01-24-2021 08:06 AM
Date Last Visited	‎02-17-2021 12:04 AM
Posts	8
Total Helpful Votes Received	5

User Statistics

User Activity

1921 router to 2960-S ethernet connection won't come 'up'

Re: 1921 router to 2960-S ethernet connection won't come 'up'

Re: 1921 router to 2960-S ethernet connection won't come 'up'

Re: 1921 router to 2960-S ethernet connection won't come 'up'

Re: 1921 router to 2960-S ethernet connection won't come 'up'

Re: 1921 router to 2960-S ethernet connection won't come 'up'