About kgndata21

kgndata21 · 01-24-2021

I have a simple physical network of one Windows 10 laptop, a 1921 Cisco router, a 1921 Cisco router, and another Windows 10 laptop. Between the two routers is a serial link, and fast ethernet links from the routers to the PCs. Now, from the router...

kgndata21 · 02-04-2021

Hello. If you can, please take a look at my last reply to Georg. I included my commands for the T1 controller on both routers plus my full configurations for both routers. The thing is I can ping PC1 from the console port of router2, and I can pin...

kgndata21 · 02-04-2021

Hello. If you can, please take a look at my last reply to Georg. I included my commands for the T1 controller on both routers plus my full configurations for both routers. The thing is I can ping PC1 from the console port of router2, and I can pin...

kgndata21 · 02-04-2021

Hello Georg; Here are the configurations for both Router1 and Router2. These are the commands I issued on both routers:card type t1 0 0controller t1 0/0/0:0framing esflinecode b8zsclock source line independent Current configuration : 2078 bytes!! ...

kgndata21 · 02-04-2021

No, same as before...when I did a service-module ? at the prompt, this is what resulted: Embedded-Service-Engine cisco embedded service engine module

kgndata21 · 02-03-2021

Unfortunately, I receive an error msg when I try to enter the commands at either router. Error msg is 'Invalid input' beginning with the 56k parameter.

Member Since	‎01-24-2021 08:21 PM
Date Last Visited	‎03-12-2021 05:22 PM
Posts	9

User Statistics

User Activity

Unable To Ping From One PC to the Other PC

Re: Unable To Ping From One PC to the Other PC

Re: Unable To Ping From One PC to the Other PC

Re: Unable To Ping From One PC to the Other PC

Re: Unable To Ping From One PC to the Other PC

Re: Unable To Ping From One PC to the Other PC