About JackFalejczyk04006

JackFalejczyk04006 · 01-26-2021

I have an IP Phone 8861 3pcc phone that I am currently trying to provision on a 3CX pbx located on a Windows Server2016 vps instance. The 3CX community was helpful in suggesting I use the fairly straight forward and common provisioning method for gen...

JackFalejczyk04006 · 02-04-2021

One thing I have not found is a way for each line to have its own voicemail number mapped to the messages button. There's voicemail server in the provisioning settings for 3cx and CAllcentric, but only one voicemail number parameter in advanced/voice...

JackFalejczyk04006 · 02-04-2021

Thanks, that is what I was thinking. I assume that with the exception of phones that don't have wifi/bluetooth, the configuration structure for 8800 phones are identical, so I could plug line information from the 8861 config into any of the <general>...

JackFalejczyk04006 · 02-03-2021

So the problem seems to have taken care of itself, and the phone now properly registers to 3cx. So now, my question is:Is there any way to pull the phone's configuration, whether it be a line-specific profile or the whole config, from the phone's web...

JackFalejczyk04006 · 02-03-2021

First of all, the problem with the handset was fixed, turns out it was plugged into the wrong rj9 port. Ok, so I am back again at the provisioning for 3cx, and I am getting "failed no response" upon loading these settings for extension 1. For the rec...

JackFalejczyk04006 · 01-29-2021

**update** More information about the 3cx problem. It appears to be an issue with the way the phone is being configured for 3cx specifically. I had a feeling it was, but to confirm I set the phone up with Callcentric, went off without a hitch. Althou...

Member Since	‎01-26-2021 06:22 PM
Date Last Visited	‎11-10-2021 12:08 AM
Posts	9

User Statistics

User Activity

3CX and CP 8800: Most Recommended Provisioning Method?

Re: 3CX and CP 8800: Most Recommended Provisioning Method?

Re: 3CX and CP 8800: Most Recommended Provisioning Method?

Re: 3CX and CP 8800: Most Recommended Provisioning Method?

Re: 3CX and CP 8800: Most Recommended Provisioning Method?

Re: 3CX and CP 8800: Most Recommended Provisioning Method?