About rschroeder1006

rschroeder1006 · 09-06-2022

Hi,I have a C9800-40 controller that does not send all configured telemetry data to our Telegraf/InfluxDB. Some subscriptions are sent, some not. This worked flawlessly for a few days, then some subscriptions stopped working without any change on our...

rschroeder1006 · 08-23-2022

Hi,we have a bunch of C9800-40 controllers running IOS-XE 17.6.3. Yesterday, we discovered that from about 1.200 APs more than 50% were in monitor mode on the XOR radio. 2.4GHz coverage was very bad in some areas.On the FRA page in the GUI (Configura...

rschroeder1006 · 08-19-2022

Hi,when we used FlexConnect, all the APs logged every single association and disassociation of a client, i.e.:%DOT11-6-ASSOC: Interface Dot11Radio0, Station aeda.0a63.xxxx REAP Associated KEY_MGMT[Open]%DOT11-6-DISASSOC: Interface Dot11Radio0, Deauth...

rschroeder1006 · 06-04-2022

Hi all, can anyone give me a hint on how to get transceiver data (e.g. RX/TX power) out of Nexus 9300 series switches with NX-OS telemetry streaming? I have a working telemetry configuration, just need to know the "location" of the transceiver data f...

rschroeder1006 · 11-16-2021

Hello all,I am searching for a way to get the location of all devices from DNA-Center via API.The only solution I found is to first get a list of device IDs (/intent/api/v1/network-device) and then get the details for every device (/intent/api/v1/dev...

rschroeder1006 · 10-11-2022

I managed to solve the issue and it wasn't at all a problem with the C9800 controllers!The problem was in out InfluxDB itself. From Telegraf, I got lots of the following errors:E! [outputs.influxdb] E! [outputs.influxdb] Failed to write metric (will ...

rschroeder1006 · 10-11-2022

...and here is the solution: SNMP traps that will be sent to syslog with the help of a trap handler script.First, install a SNMP trap receiver (Net-SNMP) with the following configuration (snmptrapd.conf) on your syslog server:disableAuthorization yes...

rschroeder1006 · 09-13-2022

We managed to solve our problems. As soon as we removed all AireOS controllers from the RF-Group (split the RF-Group into two groups), FRA began to work on the IOS-Controllers again. The GUI does not show that (Last run and Last run time are always 0...

rschroeder1006 · 09-13-2022

Upgrade did not help, the issue is persisting. I will do further investigations as soon as I have some time for it. I will keep the forum updated.

rschroeder1006 · 09-06-2022

Hi,CSCvy37351 seems to fit my issue. I will upgrade from 17.6.3 to 17.6.4 during the night an we will see what happens afterwards.Thank you for the hint!Robin

Member Since	‎02-03-2021 05:21 AM
Date Last Visited	‎06-21-2023 03:27 AM
Posts	20
Total Helpful Votes Received	21

User Statistics

User Activity

C9800 telemetry problems / how to restart pubd process?

Flexible Radio Assignment not working in IOS-XE 17.6.3?

Logging of Associations and Disassociations on Local-Mode APs / C9800

NX-OS Transceiver data via streaming telemetry

Get Device location from DNA-Center API

Re: C9800 telemetry problems / how to restart pubd process?

Re: Logging of Associations and Disassociations on Local-Mode APs / C9

Re: Flexible Radio Assignment not working in IOS-XE 17.6.3?

Re: C9800 telemetry problems / how to restart pubd process?

Re: C9800 telemetry problems / how to restart pubd process?