I have a optical network designed over singlemode fiber. All my communication modules are based on the standard 1000BASE-LX, which is the GLC-LH-SM SFP module. However, I would like to add to my network an external component rated ...
Thanks a lot Tom !I'm going to use a LX10, but I will push to get the power transmit by my 30 dB component. And if needed, I will use an attenuator on those link. I appreciate your help.
I do not find the 100Base-EX and 100Base-ZX in the IEEE 802.3 standard, so I assume that they not standard. If the distance is less than 10 km, would you suggest to get a 100Base-LX10 module, or should I get a 100Base-Ex anyway.Also, is there adverse...
As I my datasheet of my external component do not mention the communication standard that it is using. Would you assume that it is a 100BASE-LX10 if it is marked as singlemode, 1310 nm, 100 Mbps with a link budget of 30 dB? And that this component wo...
Thank you for the clarification.Also, it seems that there is 2 standard for fast-ethernet at 1310 nm, 100base-fx defined in clause 26 of 802.3and 100base-lx10 defined in clause 58. The first one correspond to a shoter distance over multimode and the...
