About Bob_Rock

Bob_Rock · 04-07-2021

Hi,I will have to upgrade several ASR920 routers for our customer and i'm wondering if anybody had any issues with the upgrade procedure. Lately I had a couple of bad experiences with upgrading Cisco equipment, so I'm taking all the precautions I can...

Bob_Rock · 03-23-2021

Hi, sorry for this simple question but I cannot find what is the MAX throughput licence you can buy for ISR4331.I have found info that 4431 is maxed at 500Mbit/s and 4331 is maxed at 300Mbit/s, is this correct ? show platform hardware throughput leve...

Bob_Rock · 03-18-2021

Hi, does anybody know how to resolve the issues regarding IR829 not booting.I have write erased config on one of my routers, now router is not booting it cylcles like this over and over.IR829 Loader Stage 1 Version 1.23 FPGA version 0x20b00 built 20...

Bob_Rock · 02-16-2021

Hi all , I'm a litle bit lost regarding bridging vlan on my router ASR1111 (IOS-XE, no more IRB support).I have read about BDI, and i'm trying the get a grasp of it. The point is I would like to bridge vlan through my router on specific interfaces fo...

Bob_Rock · 04-07-2021

Hi, what do you mean it did not "kick in" ? How did you solve the issue ?If the upgrade will fail I will go to the site and connect with the console cable, but due to corona lockdown we have to try upgrades remotely first.

Bob_Rock · 04-07-2021

Thank you very much for the answer John, I have also asked Cisco support and I got the answer that I should just go for the latest ROMMON version. I think I got everything cleared now, the only issue will be lack of console access to the router durin...

Bob_Rock · 03-22-2021

I mean It could be, but it's weird because if you use bundle install it checks the image in the process before installing it.I used SCP to copy the image from our server.

Bob_Rock · 03-22-2021

Hi, Factory reset did not help, I had to boot in rommon-1, delete images, copy image from usb and boot that image.

Bob_Rock · 03-15-2021

Hi, I have the same issue with IR829, could you please tell what do you mean with "Enabling ssh on the Loopback0 interface causes the bundle install to fail", I dont have ip ssh source-interface loopback 0 or something like that in my configuration....

Member Since	‎02-16-2021 04:06 AM
Date Last Visited	‎09-22-2021 12:21 AM
Posts	13
Total Helpful Votes Received	5

User Statistics

User Activity

ASR-920-4SZ-A

ISR 4331 - Max throughput licence

IR829 - failed to boot

ASR1000 - Bridge Domain Interface

Re: ASR-920-4SZ-A

Re: ASR-920-4SZ-A

Re: IR829 - failed to boot

Re: IR829 - failed to boot

Re: problem solved