Hi all, i am wondering what will happen when a endpoint attached to aci is using the same IP address as the gateway address in the bridgedomain it belongs to.- will other endpoints in the same bd suffer from this when there are 2 places with the same...
Hi All, I am creating and testing backups for the CIMC remotely, these are going well but if I want to restore a backup then I get Status: Partially imported configurationDiagnostic message: Partial Succes From IMC log: parser_main.c:208:Partialy pa...
Hi all, We have an Multisite setup with 2 locations and have Cloudsec enabled, every 15 minutes the keys will change. We also have recurring snapshots for the Fabric on both sites, but if we have made no changes at all ourself we still see changes in...
Hi all, is there a command in the APIC cli to find out all hardware details for all devices in the fabric, serialnumber, fan, psu, SFP's in use etc and the related hostname. moquery -c fabricNode > is not giving the details i would like.
Thanks, i've sent an email to them and they replied back.===================================HiThank you for our email.It’s common for people to have multiple Cisco.com (CCO) accounts for their personal and business email addresses. Fortunately the ce...
Hi I did see that this issue was solved for you but i am just replying is someone else have this issue.I have had the same issue for the APIC controller on C220 M5, baudrate was set to 115200 but kept blank also. I found out that if Serial-Over-LAN i...
Hi, i have a question regarding this Fault How would you know which port causes the drops, when checking our syslog this is not clear. What is states is that the sdvpcpath-109-110-to-901-902, this would imply that packets have dropped between vpc-pa...
Hi nice overview, thanks. If have a question regarding a topic i found on the internet which i don't see in yours, is this needed?Updating your known_hosts file on the APICIf you try to SSH to the new leaf switch from the APIC and you have connected ...
