About CarloSalvador

CarloSalvador · 07-19-2022

Hi Guys, Need your advice.I have an issue right now with a couple of users in our company. We are using RingCentral softphone and it is working fine last week.Today, we received reports from around 30 users who are working from home that their RC pho...

CarloSalvador · 11-24-2021

Hi Guys,I am getting floods of log messages below from our ISR4331 Router. These messages looks like hindering us from configuring new HSRP groups. May I ask for your opinion on this? Thank you!Nov 24 08:25:18.112: %IOSXE-2-PLATFORM: R0/0: kernel: EX...

CarloSalvador · 07-09-2021

Hi Guys, We have this configured on our User ports on Access Switch.!interface GigabitEthernet1/0/9description VoiceAndData Portswitchport access vlan 80switchport mode accessswitchport voice vlan 81srr-queue bandwidth share 1 30 35 5priority-queue o...

CarloSalvador · 06-25-2021

Hi Guys, Just would like to ask for your advice about the issue I have. We have a remote offices in the UK with IT Deskside guys onsite. These IT Deskside guys when inside the office network tries to remote a user who is working from home - connected...

CarloSalvador · 05-11-2021

Hi Guys, how can I stop the AnyConnect VPN client to prompt users to login when they are inside the office Network?I have configured Trusted Network Detection previously so that users working from home connected to their own home internet will be pro...

CarloSalvador · 07-20-2022

Thank you for your response. It is unlikely a firewall rule blocking since we are currently Split Tunneling the RingCentral traffic. We have however checked the logs also but did not find any blocking.

CarloSalvador · 11-25-2021

@Leo Laohoo Cisco IOS XE Software, Version 16.06.06Cisco IOS Software [Everest], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.6.6, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2019 by Cisco...

CarloSalvador · 07-21-2021

Thank you so much @Joseph W. Doherty for your effort in answering all my question! From here I can start to plan the next action from my end.

CarloSalvador · 07-20-2021

Hi @Joseph W. Doherty , Thank you so much for your responses. I really appreciate it much.With regards to your last response, are you suggesting to remove the these commands from all the switchports (Trunks and User ports)?srr-queue bandwidth share 1...

CarloSalvador · 07-12-2021

Hi Joseph, Thank you for your response. In that case then I will put back the configurations on the Trunks.Furthermore, would you be able to advise about this outstanding issue I've been working on for several months now? The issue is the Video calli...

Member Since	‎02-22-2021 01:26 AM
Date Last Visited	‎03-20-2025 01:13 AM
Posts	18
Total Helpful Votes Received	5

User Statistics

User Activity

RingCentral no audio when connected to AnyConnect VPN

%IOSXE-2-PLATFORM: R0/0: kernel: EXT2-fs (sda1): error: ext2_readdir

srr-queue bandwitdh and priority queue out configurations on user port but not on Trunk link

TeamViewer remote is not working properly when a remote user is connected via AnyConnect VPN

AnyConnect VPN client is prompting users to login even if users are inside the office Network

Re: RingCentral no audio when connected to AnyConnect VPN

Re: %IOSXE-2-PLATFORM: R0/0: kernel: EXT2-fs (sda1): error: ext2_read

Re: srr-queue bandwitdh and priority queue out configurations on user port but not on Trunk link

Re: srr-queue bandwitdh and priority queue out configurations on user port but not on Trunk link

Re: srr-queue bandwitdh and priority queue out configurations on user port but not on Trunk link