About ArdenceSupport

ArdenceSupport · 04-25-2007

Hi,Configuring the Catalyst 3560 to prevent unauthorized access to an enterprise LAN using 802.1x Port-Based Authentication, is there any way to allow a thin client to PXE boot off the network to obtain its OS image (ex. WinXP SP2) and still maintain...

ArdenceSupport · 12-07-2006

I understand that the Catalyst 3560 supports basic IP routing by default. We would like to use the switch for inter-VLAN routing, however, our configuration requires the use of the IP Helper command to forward broadcast packets to a DHCP server locat...

ArdenceSupport · 12-05-2006

A group of clients on our network are configured to PXE boot off the network to obtain their desktop images. During boot, the clients obtain the following information from a DHCP Server:Client IP addressGateway IP addressTFTP server IP addressBootstr...

ArdenceSupport · 04-27-2007

Thanks. Yes, I understand about using the 802.1x clients, however, in this case, the thin client requires PXE to boot off its network adapter to download its bootstrap file and proceed to boot off a server containing the client's image.The issue is t...

ArdenceSupport · 12-07-2006

Thanks for the response.

ArdenceSupport · 12-05-2006

Thanks, we use the IP helper for the DHCP server on a different subnet and that works, but we were not sure since the TFTP request is a unicast packet, not a broadcast packet like the one sent initially to the DHCP server.We'll add the IP helper comm...

Member Since	‎12-05-2006 12:04 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	6

User Statistics

User Activity

802.1x Port-Based Authentication on a Catalyst 3560 switch

IP Helper with Catalyst 3560

TFTP between subnets

Re: 802.1x Port-Based Authentication on a Catalyst 3560 switch

Re: IP Helper with Catalyst 3560

Re: TFTP between subnets