All, We recently upgraded a three server CUCM cluster to 10.5.2 SU3. Since then we noticed that a phone will be listed as registered on only one of the two subs, and listed as "none" or unregistered on the other sub. As a phone can talk with only o...
Have a public phone line connected to my CUCME 2801 router VIC2-2FXO card. All inbound calls are passed to DN-5001 (group number). Can receive and send calls without a problem, but incoming calls all show "911" for caller ID. Think this is simply ...
All, I've been trying to get an AIM-CUE working with 7.0.6 but keep running into a problem. Other discussions have said I need to get a new CF, but I've been thru three (one of them Cisco). I've also tried to load multiple CUE versions (3.0.1, 3....
I've been working my way thru all the problems trying to get CUE loaded on an AIM-CUE card in a 2801.Got to the point that the card will load the software from the FTP server, but after selecting the language (English only) it stops with the errors s...
As part of my CCNP-Voice lab I bought a 2801 setup a little home lab. Later I bought a AIM-CUE for it. Later still I got a 1GB CF card, but no matter what I do the CF card will not work in the AIM-CUE. I keep getting an error stating "Not a cisc...
All, It is working now. After I added the caller-id enable I didn't stop, start the interface. Took me a bit to think of that. Now it is working well. Thanks to all. Kirk
Chris, Thanks, but that didn't work. I added "caller-id enable" to voice-port 0/0/0 (where the outside line plugs in) but it did not fix the issue. Called again and still got 911 as the caller-id. I know a good caller-id is being passed in be...
Leo, I'm still having this problem. Have gone thru multiple CF cards, including a brand new 1GB Cisco card, all with the exact same results. Do you do anything to the cards before plugging them into the AIM-CUE? Thanks. ...
Brian, Figured I would take the risk of pulling my CF card from the one slot 2801 I have. I blew up my router cookie about two months ago, but restored it, so I figured I would try. Got lucky and was able to pull my running CF card out and format...
