About csonnen

csonnen · 12-10-2002

Hello everybody,I have build a VPN network between 3 offices connected together in the form of a triangle, all equiped with 1710 routers. The config is learnt from samples from this very helpfull forum (many thanks to all of you!!!) and output of con...

csonnen · 11-30-2004

posted it twice, deleted this one, sorry

csonnen · 11-30-2004

Since the 1720 afaik has build-in VPN and hardware crypto-module like my 1710, you should absolutely be able to VPN without EasyVPN.I don't know much about the 3005 config, but if it uses IOS, it might work likewise as the 1720 as far as the needed c...

csonnen · 10-14-2004

This issue has finally been solved. After upgrading the routers to IOS-Release 12.3(7)XR [c1710-k9o3sy-mz.123-7.XR.bin] it worked whitout any other changes. So this was from my point of view a pure IOS issue.Christoph Sonnen

csonnen · 06-02-2004

Chad,sorry for the somewhat late reply, I must have missed your posting.No, I do still have the same problem. I think it's actually a standard config, but i don't get it to work. As soon as the "crypto map my-cr-map client configuration address respo...

csonnen · 03-26-2004

Well, thanks for the reply, that is what i did from the beginning.If you like to you can see the whole config including debug logs here:http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%4...

Member Since	‎11-18-2002 02:13 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	12

User Statistics

User Activity

3 meshed 1710 and client 3.6 connect problem

Re: VPN tunnel from 1720 to 3005

Re: VPN tunnel from 1720 to 3005

Re: 3 meshed 1710 and client 3.6 connect problem

Re: 3 meshed 1710 and client 3.6 connect problem

Re: Client and Peer-to-peer