About jsah

jsah · 03-27-2019

Did you check that template setting used for this camera. Make sure that you have not enabled the "Record on motion" setting on template, which in turn ask you to enable the "motion window on cameras". Use continuous type recordings for camera.

jsah · 03-27-2019

There is no 1.4.4 release for the CPAM on MSP. It's there for 1.4.1 for MSP and PAME appliance. https://software.cisco.com/download/home/282089927/type/282463808/release/1.4.1 However, if you wish to install the on UCS-B,C series server, here is th...

jsah · 01-21-2019

This issue mainly occur due to older firmware running on device. You need to upgrade the camera firmware to latest version (2.10). Please get it upgraded and test setting the motion window.

jsah · 01-08-2019

There is announcement for the Cisco Video Surveillance 2000 IP Dome and is now obsolete (past End-of-Life and End-of-Support status). https://www.cisco.com/c/en/us/obsolete/connected-safety-security/cisco-video-surveillance-2000-ip-dome.html

jsah · 12-05-2018

What audio codec you are using there?

Member Since	‎06-20-2015 02:22 AM
Date Last Visited	‎05-30-2023 06:32 AM
Posts	118
Total Helpful Votes Received	78

User Statistics

User Activity

Re: Turning OFF record on motion on the Cisco IP 8030 camera

Re: CPAM 1.4.4 installation software for MSP

Re: VSOM 7.9.0 camera error

Re: CIVS-IPC-2421 firmware update

Re: API /clip/createClip