Yes its doable with the Preference. If you would like to have Site 3 to Site 4 Communication this can be achieved using Transport gateway which is used to connect two disjoint network. In this case Site 1 or 2 can be Transport gateway for Site 3 -Sit...

Hi ,   From your Scenario I understand R1 and R3 has both Private1 and Public-internet whereas R2 and R4 has only Public Internet. In this case when R1 wants to communicate with R4 then R1 routing table has R4 site routes with next hop of R4 Public I...

Hi, Have you tried creating Centralized Data Policy Matching Source and Destination , choosed Next Hop pointing towards Core in Action TAB and Apply the data policy from the tunnel ? https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/p...

Hi, Can you share me the output of "show sdwan run" to know the acl config of tunnel interface?

Hi, As you might already aware the device would just form the temporary tunnel to vBond we may not be able have the dtls up and running However Ping should be working. I suggest you to reach TAC  to validate if vBond receives the traffic when you try...