Dear all,I have a ASA5505 with base license. I want to use 5 vlan so I need to upgrade to Secruity p...

I config "ip flow ingress" under the port-channel interface but when show ip interface port-channel,...

I would like to purchase Cisco Unified Communications Manager Business Edition.What is include for t...

i am using catalyst 6509 with native ios.Thanks.

I have a layer 3 switch, gi1/1 & gi2/1 is port-channel and the channel port is a routed port. I have...

Dear all,I have a 3660 router with C3660-MB-1FE installed.The show version doesn't display the 1FE. ...

7801 is one of ip phone extension. when i dial 33337800, the call can made to 7801.. but from debug....

I am using CME router with VIC-2DID card. I find that the cme router did not receive any digit from ...

Sorry, I have a new finding. I found that there is no digit receive from the did line. When I create...

Since telco provide 3 digit. I setup a phone with 3 digit (ext. 857). I remove the translation profi...

The DID doesn't work. When I dial in, I can see the DID port light up.Attached is the debug vpm sing...

Is the translation-profile on dial-peer is incoming or outoging? Is below config ok?voice translatio...

Dear all,Ip Phone extension use 4 digit (e.g. 8110). The CO provide 3 digit (i.e. 110) via the Direc...

Hi,The wlc is configured to use the Microsoft IAS with 802.1x for authentication. When I boot up the...

Hi all,I have configured my callmanager express and unity express to use auto-attendant with ext 880...