Hi,I'd like to have more information about "Multicast reflection" feature, I found in CCO only a configuration guide with no answer to my issue, I'd like to use the feature in PIM Dense mode network while in the config guide only PIM Sparse-mode impl...
Hi,I have to plan a network infrastucture with MPLS-IPv4, IPv4 and IPv6 routing tables.Since I have an hybrid network and dual stack IPv4/IPv6 routers I must manage both protocols for all boxes using SNMP and IP SLA.Can the SNMP IPv4 traps from the r...
HI all,I'd like to use eem to check Sip dial-peer status+interface BRI status, when sip dial-peer has no answer to invite and bri interface is down the LAN interface must be shutted down. Is it possible to avhieve it using eem? I didn't find anything...
I have a 6506 platform and I would like to end L2TP sessions on this device, AAA authentication for dialin user and configure av-pair attributes. Has 6500 platform any way to accomplish the request? Is there any special card that can do this work? I ...
the task require that receivers in one organization can be able to join sources in other organizations (maybe two, three or more companies are all connected togheter in a LAN or using WAN point-to-pont connections), implementation of msdp or MBGP adv...
Reading the configuration example in docs (thanks Calin) I guess the RP and the Vif are on the same router although this is not esplicitly said.The question is:Why the Vif and the RP have to be on the same router? Multicast Reflection mustsee the joi...
I think there's no show command to check SIP dial-peers availability, backup peers are activated using "SIP ping options", I guess the right way to achieve the goal must consider other protocols than SIP operations for eem to work correctly, so I wou...
