snmpwalk -v 1 -c public  <IP_ADDRESS_OF_THE_SWITCH>   or  snmpwalk -v 1 -c public  <IP_ADDRESS_OF_THE_SWITCH>   <OID>   For example, to pull zone information from MDS switch: # snmpwalk -v 1 -c public  <IP_ADDRESS_OF_THE_SWITCH>  enterprises.9.9.294...

 This page is to build a collection of known CVEs on MDS.

 Steps to clear cfs lock. 1) "show cfs lock" to find out which cfs application and which switch holds the lock Application: device-alias   <--- find out the application that locks the cfs Scope      : Physical-fc ------------------------------------...

  Get information 1) the hardware and software by using CLI command "show version" 2) get HBA pwwn from server or storage administrators [note 1] and create a table   VSANZone NameDevice TypeDevice pwwn10production_zone_1server (initiator) 20:11:12:...

Galen Guanlin Zhang is a certified, Data Center expert and Data Center Storage Networking Design Specialist with Cisco. In this video, Galen presents how to obtain, install, verify and back up license on NX-OS based systems including Nexus and MDS sw...