Hi,
I'm trying to perform a VA scan with Qualys and ISE when a workstation executes a 802.1x authentication.
I can see that the authorization profile for the VA Scan was called and I've integrated Qualys via the Threat Centric NAC portion of the ...
There's no info showing on the Console about the switch ports. Is there anything that I need to add on the Catalyst 3750 switch configuration so the ports can be discovered and traffic be gathered?
As I've posted, the scan are not being triggered even when the right profile is triggered during authorization. So there's nothing on the Context Visibility / Endpoints / Vulnerable Endpoints.
Paul,
On the Qualys setup in ISE, I've indicated the same Option Profile name on the configuration which is the same as the one in the Qualys Option Profiles tab.
I've waited for few hours now and the scan still does not start.
Yes I've followed every step in the document. As you can see from the result of the Authorization Profile, it has downloaded the Qualys Scan Auth Profile.
Hi,
The catalyst switch you're monitoring needs to have the corresponding Service Modules that will support NetFlow.
You'll need to check your switch / firewall inventory if they have this Service Module before the StealthWatch console is able to s...
