About simoncope

simoncope · 05-18-2021

Hi, I have a pair of new C9500-16X-2Q switches that I am attempting to pair using StackWise Virtual. They are running 17.03.03 in INSTALL mode and have the requisite Advantage license (show version output attached for the 1st switch). The intention i...

simoncope · 05-19-2021

Hi. show run outputs for both switches posted yesterday at your request: https://community.cisco.com/t5/switching/c9500-16x-2q-pair-no-boot-when-stackwise-virtual-enabled/m-p/4404789/highlight/true#M505075

simoncope · 05-19-2021

1. Is the ports working and come up, without SWV configured ? - yes2. When you reload, ( what is the console output of both ? (this was asked before also - we expected to see the full boot). - I posted this output in my original post (well, just for ...

simoncope · 05-18-2021

Sorry, that was a typo. The DAD command would have been: NET-SW-1200-R04-01(config)#int Fo1/1/2NET-SW-1200-R04-01(config-if)#stackwise-virtual dual-active-detectionNET-SW-1200-R04-01(config-if)#exit As obviously Fo1/1/1 was being used for SVL. Anyway...

simoncope · 05-18-2021

It is fine, I understand. It is my first time attempting to set up Stackwise Virtual, so I accept that I may have got something wrong. From those basic switch configs I then add the commands (for example): NET-SW-1200-R04-01(config)#stackwise-virtual...

simoncope · 05-18-2021

Sure, both config files attached now. Note that you will not see any Stackwise Virtual commands in there due to the problem outlined in my original post. You will have to trust me that at this point they have been applied (see original post) and save...

Member Since	‎05-18-2021 03:19 AM
Date Last Visited	‎05-24-2021 05:19 AM
Posts	8

User Statistics

User Activity

C9500-16X-2Q Pair - no boot when StackWise Virtual enabled

Re: C9500-16X-2Q Pair - no boot when StackWise Virtual enabled

Re: C9500-16X-2Q Pair - no boot when StackWise Virtual enabled

Re: C9500-16X-2Q Pair - no boot when StackWise Virtual enabled

Re: C9500-16X-2Q Pair - no boot when StackWise Virtual enabled

Re: C9500-16X-2Q Pair - no boot when StackWise Virtual enabled