About Manoj Reddy

Manoj Reddy · 03-15-2023

Dear Team, R4 is having the 2 loopback IPs and have configured BGP, and from R1 sh ip bgp output I can see the R1 is learning the prefixes and below is the output of it: But now when i am trying to ping it's not working from R1: From R2 and R3 i a...

Manoj Reddy · 05-18-2021

Hi, we have an end device ABC - name changed as it's a production network, and we usually configure this device in VLAN 921, and below is port 23 from the access switch that learning dynamic IP from VLAN 921 switch#sh mac-address-table int Gi1/0/23Ma...

Manoj Reddy · 03-18-2023

@Harold Ritter, Thanks it works now and I am able to reach R4 from R1.

Manoj Reddy · 07-29-2021

@balaji.bandi @Reza Sharifi can you please help on this?The question is now, what is the best way to swap the stackwise links without causing a configuration mismatch.

Manoj Reddy · 07-28-2021

Hi, I am not a professional, but will try to answer what i can!! A Router can act as a virtual routers if you have VRFs in place, it's always not necessilarly required to have multiple NIC cards for router. Using router on stick concepts and VRF you...

Manoj Reddy · 07-28-2021

Hi @patoberli Good question!!For DAD link you need to reboot both the switches Please do that and let me know the update

Manoj Reddy · 07-27-2021

Hi, increase the cost between R1 and R3, so that R3 will prefer routes via R2

Member Since	‎05-18-2021 12:19 PM
Date Last Visited	‎06-21-2023 03:27 AM
Posts	21

User Statistics

User Activity

BGP LAB issues

MAC to IP

Re: BGP LAB issues

Re: Stackwise Virtual switch from 10 Gbps to 100 Gbps links

Re: Does a router have multiple DLLs inside?

Re: Stackwise Virtual switch from 10 Gbps to 100 Gbps links

Re: How to restrict routes in OSPF