About jschweng

jschweng · 06-10-2013

i just confirmed that when I span port on NEXUS 7K ios version 6.1(1) the RX data is duplicated to t...

jschweng · 06-10-2013

I'm setting up a montitor session on a NEXUS 7K as below.we are receiving in 150M of data and 0 data...

jschweng · 05-09-2013

The firewall statically forwards multicast to the NEXUS. I need the NEXUS to register to groups so t...

jschweng · 05-09-2013

We have a NEXUS 7000 running PIM SM. A checkpoint firewall is networke to it configured for PIM Dens...

jschweng · 04-23-2013

HelloWe have a three tier network with a centralized core switch and multitple distirbution swithces...

jschweng · 04-03-2013

We have a WAN with two remote sites. Each site has ASR routers which are configure for PIM BIDIR and...

jschweng · 03-27-2013

We have some ASR WAN routers which have a dedicated 400M interface to a remote site.Servers on our L...

jschweng · 03-17-2013

awesome - thank you sir

jschweng · 03-17-2013

how do sources register if they are directly connected to the RP?Wouldnt this be the same thing.

jschweng · 03-17-2013

If the Firewall is forwarding packets to the next hop on the inside network.and that router is confi...

jschweng · 03-17-2013

how can you bridge a dense mode routing domain to a sparse mode domanand send multicast from one to ...

jschweng · 03-17-2013

I have some checkpoint firewalls which are receving multicast from a WAN.The Firewalls are configure...

jschweng · 03-07-2013

any idea if usnig PIM SSM instead of PIM SM will resolve the issue on a 3750?

jschweng · 03-07-2013

We have a requirement to send data via multicast from source to destination it only has to go throug...

jschweng · 02-21-2013

im looking for a way to monitor the bandwidth and graphically identify the real time traffic on seve...

Date Registered	‎02-21-2007 05:41 PM
Date Last Visited	‎08-18-2017 03:53 AM
Total Messages Posted	176
Total Helpful Votes Received	9

NEXUS span session getting twice the data to the span port