Hello everyone.This time, you need to establish a wireless environment using the WPA3-Enterprise security protocol.The current physical connection configuration is like this:
C9500 (BB)-C9300(Middle)-C9800(WLC)C9300-PoE(Uplink to C9300 Mid SW) > C911...
Hello everyone,Currently, the FPR equipment and C9300 equipment are connected with an optical cable.It was a cable that had been in good use before.One of the FPR2130 devices failed and was restored to its original state.But the problem is that the d...
Hello everyone.This is a lab test using FDM 7.2.0-82 firmware on FPR 2110.The lab test environment was created like this.1. The 10.10.10.1/30 Routed interface named Inside.2. 10.111.111.2/30 Routed interface named rip-test-out.3. L3 (C9300) equipment...
Hi all,
I'm trying to running a Thousandeyes agent on C9300 device.But I having a problem with it.
I activated agent in C9300 but can't start up.I deployed Thousandeyes 4.4.4 on C9300L-48P-4G 17.06.05, WLC included.
I successed TE 4.1.0 on same switc...
Hello everyone,This time, the license registration of the FDM OS running on the FPR 2110 device was canceled, so an attempt to register it with SSM failed.
The problem is that two 2110 devices are operating as FDM, but the license of one device is ma...
Hello, thank you for your reply.As a result of checking through the show ap client-trace events mac (User MAC) command, it was confirmed that there was no direct log from the AP. (A test log in which the password was entered incorrectly remained, but...
Hi, MHM
I was checking about LACP, but I couldn't find any difference in settings between FCM and ASA.It is strange to me to think that the Secondary duplicated the configuration, but the SERVER context is normal with LACP settings, but the FAB conte...
Hi MHM,
Here's info.
[1] Interface status (Te 1/1/1, 2/1/1 were grouped on Po40)
[2] show interface Te 1/1/1, 2/1/1
[3] Logs about Te 1/1/1 and 2/1/1 : As I mentioned, Interface log was finished state to Up.
[4] Show runn interface Te 1/1/1, 2/1/...
