About SeokGeunChoi73564

SeokGeunChoi73564 · 07-26-2022

Hi, I want to know about Meraki MX logging entries and definitions. I can't find docs about this.. And this is what I find (https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/Syslog_Event_Types_and_Log_Samples) I want to...

SeokGeunChoi73564 · 06-20-2022

hi.This time, the communication related to the license authorize was blocked due to the firmware problem of the C9200L device, so the problem was solved through manual license key registration.Reference Manual: https://www.cisco.com/c/en/us/support/d...

SeokGeunChoi73564 · 06-14-2022

Hi, I can't solve this problem.Currently I configured multiple SSIDs didn't work.Hardware specification is below.WLC : C9800L-C-K9SW : Cisco CatalystAP : C9115AXE-K The symtoms are like these.1. Switches are can receive IP from DHCP pool.2. APs are c...

SeokGeunChoi73564 · 05-09-2022

Hi, I want to know 2 things about ASA on FPR2100.1. When is EOS,EOL of Firepower 2100 ASA Standard ?2. My ASA FPR2100 license suddenly got into the above state.I've been using it for years with a successful license registration, but it's broken.The l...

SeokGeunChoi73564 · 04-20-2022

Hi, I would like to know if the CBW140AC model can also be used outdoors.

SeokGeunChoi73564 · 02-23-2022

Hi Georg,I think this problem coming to solve soon. this is current eem configuration.and this is log.EEM syslog msg shows after 09 am, but the time display still shows 00.It seems that once this problem is solved, it will be completely solved.thank ...

SeokGeunChoi73564 · 02-20-2022

Hi,Unfortunately, it doesn't work. still triggered at 00:00AM..Thanks for help.

SeokGeunChoi73564 · 02-15-2022

Hi Georg, Thanks for replying. Here's changed configuration and the switch version isHope it works correctly!

SeokGeunChoi73564 · 02-13-2022

Hi, I configured the switch as you suggested and checked the logs generated over the weekend, but it still runs at 00:00.And today EEM didn't even run. thank you for helping.

SeokGeunChoi73564 · 02-07-2022

Hi,I configured service timestamp and ntp. but still triggered at 00:00AM..

Member Since	‎05-31-2021 10:19 PM
Date Last Visited	‎08-10-2022 01:17 AM
Posts	28
Total Helpful Votes Received	5

User Statistics

User Activity

MX logging entries and definitions

Catalyst 9000 series Switch License.

C9800L-C

FPR 2100 ASA standard license

Is CBW140AC model can usable in outdoor too?

Re: EEM Cron-entry

Re: EEM Cron-entry

Re: EEM Cron-entry

Re: EEM Cron-entry

Re: EEM Cron-entry