What I am trying to do:
Simply authenticate and login to a Cisco Cloud Services Platform GUI or CLI via RADIUS with admin-group privilege (or any group).
CSP is standalone, basic config, just the built-in admin super-user present. Reachability to ...
Hi, I'm connecting a brand new out of the box Fortigate 60F to the N2K FEX in our ACI mini lab and after configuring the port in APIC it goes into an 'bpdu-guard-err-disable' state. I know that FEX has bpdu guard on by default and you cannot disable ...
Is anyone able to provide the av-pair values Cisco CSP requires?
In Microsoft NPS I've now tried Vendor Specific: Cisco-AV-Pair
shell:priv-lvl=15shell:priv-lvl=admin-groupshell:domain=admin-groupshell:group=admin-groupadmin-grouppriv-lvl=15priv=lvl=a...
Is it really the case that Cisco Cloud Services Platform running on the latest available 2.9.2 code from 2022 with a vanilla RADIUS config cannot handle receiving Message-Authenticator AVPs in RADIUS Access-Accept packets???
Can anyone out there conf...
Yes I have tried all of these Service-Type attributes with no success using FreeRADIUS and also with Microsoft Network Policy Server as the RADIUS server.
You mentioned in previous post "we use ISE and ACS works as expected with CSP".Specifically, wh...
Hi,
I'm now testing with Windows Server 2022 NPS. The domain password being used meets the password complexity requirements in the CSP documentation, still I cannot login but Wireshark and Event Viewer I can see Access-Accept response and authenticat...
Does Cisco support onboarding 2 x 9500 Stackwise Virtual switches to DNAC via PnP?
Is what is covered in this thread officially recommended by Cisco? Perhaps someone from Cisco can post here and confirm what the workflow should be for onboarding 9500...
