Hi everyoneWe have an ASR1002-X and need to implement 44 NAT with the ratio of 4:1 (every 4 private address to 1 public IP NAT)I know there is a solution called "paired-address-pooling|, but the minimum ratio for this solution is 30:1 , (every 30 pri...

Hi everybodyI've nat configurations on my router and everything goes well .But in "show ip nat statistics" output , it shows some drops ( In-to-out drops: 3124 Out-to-in drops: 1136 )I dont know the reason and the meaning and I couldnt also find anyt...

Hi AllAnyone knows , is it possible to log ppp ip assignment to syslog ? (without using debug command)I mean logging ip assignment over the ppp phases from local pool to users via logging levels (0-7) in BRAS(ASR Router) without using debug command ....

Hi all I'm looking for a Cisco device in order to have large scale NAT (CGN).Anyone can advise me how to select suitable device (hardware) either any calculator application which can show what hardware would be suit.I've about 1Tbps traffic and about...

Hi All I've an ASR1002 which NAT some traffic.Since I check the translation table , some lines dont show anything about protocol and instead show "---" so too about outside local and global.(The red part in picture)Anyone knows what the story is ?Exp...